[sdiy] slider search

[Mike Gorman]

I managed to match most of the sliders for this project from Mouser. The
only small exception was that I got a dual gang pot for the 10k log, as I
couldn't find single gang (with matching pitch and lever length), but I can
just ignore the 2nd gang so this wasn't a major issue.

Part numbers from Mouser are:

688-RS45112A6A05 - 10k dual gang lin
688-RS45111A6A08 - 10k lin
688-RS45112A600J - 10k log

These are all ALPS pots and 45mm travel versions.

Hope this helps.

Regards

Mike

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of luther rochester
Sent: 04 October 2011 21:45
To: synth-diy DIY
Subject: [sdiy] slider search

I'm building my BOM order for Juergin's Polymoog resonator board, and 
I'd really like to use sliders for the controls like the original. 
However, I'm having trouble finding a source that has all three types 
needed:

3  10k dual gang lin
3  10k lin
5  10k log

I'm making a stereo pair of these, so I'm going to need double these 
numbers. 45mm travel seems perfect, but a little smaller or bigger could 
do. It seems that nearly all the dual pots I've found are log taper.

Any ideas?
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy