[sdiy] SAH190 vs SAA1030

[Mike Gorman]

Florian,

There appears to be a Service Manual for the ARP Solina here:

http://www.cem3374.com/archive/arp.htm

and from my reading this also appears to use a SAA1030 as the Master
Oscillator as well (then SAJ110's as dividers). 

I've just found another potential supplier if you are stuck for this chip
though:

http://www.wdgreenhill.com/AtoZ/semiconductors_6.htm

No idea how much they charge or what their current stock levels are, but it
might be worth a try.

Regards

Mike

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Florian Anwander
Sent: 03 October 2011 19:20
To: Synth-DIY
Subject: [sdiy] SAH190 vs SAA1030

Hello,

the Eminent Solina of a friend of mine has a broken TOG. It is a 
SAA1030. Senso has a SAH190 in his list. I don't find a datasheet of the 
SAH190. So the question is: are these compatible?

It seems the SAA1030 was used in the original Eminent Solina, and the 
SAH190 in the ARP Version.

Anyone has the service manual for the ARP Solina?

Florian
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy