[sdiy] DSI,storage of sound programs, setups, etc, dsPIC?

[Tom Wiltshire]

On 23 Mar 2011, at 22:43, <jays at aracnet.com> wrote:

> Programming flash is usually done in large blocks. So to write a couple
> of parameter changes out you usually have to read the block, modify it
> and then write it out again. EEPROM areas are usually smaller and you
> might be able to write individual address' in it.
> 
> Jay S.

Another good point. The dsPIC flash I was using can only be erased in 1024 byte/512 word blocks. Pretty annoying if you're only trying to store a handful of words of config data.

T.