[sdiy] SSM2164 protection

[David]

Brilliant. Thanks Neil and Oscar!

David


Sincerely,

David Ingebretsen

David M. Ingebretsen, M.S., M.E
Collision Forensics & Engineering, Inc.
2469 E. Ft. Union Blvd., Ste 114
Salt Lake City, UT 84121

dingebre at CFandE.com
dingebre at 3dphysics.net
801 733 5458



-- -----Original Message-----
-- From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-
-- bounces at dropmix.xs4all.nl] On Behalf Of Neil Johnson
-- Sent: Tuesday, March 08, 2011 3:27 AM
-- To: synth-diy at dropmix.xs4all.nl
-- Subject: Re: [sdiy] SSM2164 protection
-- 
-- David,
-- 
-- David wrote:
-- >>I love you, Neil Johnson and Oscar Salas!
-- 
-- Thanks!
-- 
-- Mark wrote:
-- > Be careful there, David. The diode needs to go from -15 to ground not
between -15 and
-- the chip's supply pin.
-- 
-- He's right: the diode goes between pin 9 and GND (reverse biased under
-- normal conditions).
-- 
-- Cheers,
-- Neil
-- --
-- http://www.njohnson.co.uk
-- _______________________________________________
-- Synth-diy mailing list
-- Synth-diy at dropmix.xs4all.nl
-- http://dropmix.xs4all.nl/mailman/listinfo/synth-diy