[sdiy] iphone/ipod/ipad oscilloscope - cable

[Stewart Pye]

You could just build a little box with a BNC socket and some protection 
inside with a flying lead with 3.5mm plug. Then you could use a standard 
cro probe.

Stew.

Julien Delgoulet wrote:
> Hi all,
>
> I was about to buy a small digital oscilloscope like the DS nano and realized that oscilloscope applications exist on the idevice platform.
> I started looking around to find a cable that will ensure the non-destruction of the idevice and saw this model : http://hmb-tec.de/HMB-TEC/Scope_Cable.html.
>
> Did some of you have been using it ?
> Did some of you actually use such a scope ?
> Do you know any sources for cables other than the one I specify above ?
>
> PS : I'm not discussing the advantage/disadvantage of such a scope. I already own a big one but was looking for a small one while prototyping (just to saw signals etc etc) as I have a small flat ;-)
>
> Thanks for your lights !!
>
> Julien
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
>