[sdiy] SSM2164 last time buys

[Neil Johnson]

Hi,

Stewart Pye wrote:
> It depends if the voltage drop across the resistor is a problem I guess...

Looking at Oscar's figures I'd go with either 510 or 330 Ohms.  Both
seemt to have negligible effect on the operating current but offer
suitable protection from missing V-.

I would then add a suitable local decoupling cap to offset the
increased impedance of the supply rail.

Ultimately though this needs listening tests to hear if there are any
audible artefacts.

Neil
-- 
http://www.njohnson.co.uk