[sdiy] Modular Theremin or Heterodyne VCO

[Mrs. Rectangular]

I am familiar with the Paia theremin. I had a friend of mine that I used to know show me his theremin that he built after he made his Paia. He had modeled his design off the Paia but left out as many features as possible to decrease interference which worked out well for him. That is one of the things that inspires me to create a controller box with antennas and CV outs so that it can be kept at a distance from all other electronics or interfering devices. Such as the VCO, VCA, and the rest of the synth.

--- On Wed, 7/6/11, bill bigrig <billbigrig at yahoo.com> wrote:

> From: bill bigrig <billbigrig at yahoo.com>
> Subject: Re: [sdiy] Modular Theremin or Heterodyne VCO
> To: "Mrs. Rectangular" <mrs.rectangular at yahoo.com>
> Date: Wednesday, July 6, 2011, 9:07 AM
> Howdy,
> 
>  Get a PAIA kit. It has CV & gate outs. The front panel
> might fit in a modular, or, you may have to make a different
> panel.
> Rig
> 
> --- On Tue, 7/5/11, Mrs. Rectangular <mrs.rectangular at yahoo.com>
> wrote:
> 
> > From: Mrs. Rectangular <mrs.rectangular at yahoo.com>
> > Subject: [sdiy] Modular Theremin or Heterodyne VCO
> > To: synth-diy at dropmix.xs4all.nl
> > Date: Tuesday, July 5, 2011, 11:48 PM
> > Hello to all other users of sdiy. I
> > have been reading many of the archives and doing a lot
> of
> > web searches about several ideas, and I just though it
> was
> > time to ask...could someone point me in the right
> direction
> > or the ideal method for setting up a theremin type
> device in
> > a modular format? I would like to use antennas that
> create
> > control voltage to then plug into a VCA and a VCO that
> would
> > employ a heterodyning principle. 
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at dropmix.xs4all.nl
> > http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> > 
>