[sdiy] trying to control CV sequencer with DAW

[Justin Owen]

-----Original Message-----
From: dan snazelle [subjectivity at hotmail.com]

>Recently I purchased an MFB seq-02 step sequencer for my modular
>it has a clock in input which can take 96 or 16 ppqn
>I have a PAIA midi2cv converter which has a DIN SYNC mode and a drum mode
>I am using LOGIC

Try setting up a GM Instrument track in Logic which sends Note On/Off to your MIDI Out.
Set up a track with 96th notes making your note length just a bit shorter than a 96th
>From there you can try sending very fast Gate On/Off info as a clock to your sequencer or you can try the same thing in drum mode - your sequencer will get pulses instead.

I've clocked a few things with Gates at MIDI clock speed - it's not pretty but it (mostly) works-ish.

HTH.

J