[sdiy] 3.3 V regulators

[John Luciani]

I use the On-Semi MC33269. Low-cost. Easy to get.
You need to be careful of the caps that you use. The
datasheet recommends that the ESR fall within the
range of 0.2 to 10Ohm. I use the Nichicon PW series.

If you scroll down to the bottom of tha page at
http://wiblocks.luciani.org/NB1/NB1A-index.html
you will see the part numbers that I use on my
boards.

(* jcl *)

http://www.wiblocks.com