[sdiy] (OT) Doepfer MIDI-CV oddity

[NSSINC]

	Not that this will be any help, but I have the same problem with a home
made MIDI splitter driving an ESQ-1. Dropped notes etc. But if I patch
it after going thru another keyboard's thru, it works fine. And I don't
have any (intentional) ground connections in the splitter. Never looked
into it more after I found the quick "fix"...

-Al


Justin Owen wrote:
> Hey all,
> 
> Apologies for the OT - thought some of you might have a take on this.
> 
> I recently acquired a Doepfer A-190-1 MIDI-CV module which, initially I thought was faulty. It regularly drops/misses/ignores MIDI Note On/Off/Gate info - or at least fails to output it at the Gate Out.
> 
> Today, just as a test, I ran out of my normal M-Audio MIDI interface, into another MIDI-CV unit, out of the MIDI Thru of that and then into the A-190-1... which seemed to fix the problem. Odd.
> 
> I swapped leads round - same deal. Won't work direct but will work out of another units Thru. I've never had any problems with this MIDI rig so far, the main lead I use is only a few meters long and it works with everything else I throw at it.
> 
> Clues?
> 
> Thanks - again, sorry for the OT.
>