[sdiy] PIC advice needed (OT)

[Karl Ekdahl]

Harry

I just started using the MPLAB X beta of MPLAB and it's a *huge* step up from MPLAB that you might want to try. I'm having a ICD2 clone and it's pretty great, haven't stumbled upon any bugs so far... (tho i run Linux, might not work as well on other platforms)

Karl

--- Den tis 2011-01-18 skrev Harry Bissell <harrybissell at wowway.com>:

> Från: Harry Bissell <harrybissell at wowway.com>
> Ämne: Re: [sdiy] PIC advice needed (OT)
> Till: "Eric Brombaugh" <ebrombaugh1 at cox.net>
> Kopia: synth-diy at dropmix.xs4all.nl
> Datum: tisdag 18 januari 2011 17:48
> I'm using the 18F23K22 to make a
> bridge between SPI (slave) and I2C (slave). This one has two
> MSSP units for me to play with.
> 
> I'm making a programming header and I have connections to
> VPP/MCLR (1), PGD (4), PGC (5), and GND (3).  I see
> some designs that also have a "PGM" pin (6)
> on the header as well, but the device does not have a PGM
> pin...
> 
> Thanks for all the help so far. Marc's schematic was a big
> help !
> 
> H^) harry
> 
> 
> ----- Original Message -----
> From: Eric Brombaugh <ebrombaugh1 at cox.net>
> To: synth-diy at dropmix.xs4all.nl
> Sent: Tue, 18 Jan 2011 11:05:36 -0500 (EST)
> Subject: Re: [sdiy] PIC advice needed (OT)
> 
> On 01/18/2011 07:48 AM, Harry Bissell wrote:
> > Hi All...
> >
> > I need to get some help with a PIC design. Maybe
> someone here has some insight.
> >
> > I need a reference design for a PIC18F series chip.
> I'm looking for what glue might be needed, programming
> header, thongs like that.
> >
> > What tools are available for free, for cheap, and for
> $$$ (but fast to get up on) ?
> >
> > I have an MPLAB ICD2 at my disposal
> >
> > Don't ask what I'm doing, if I knew I'd be bragging
> instead of begging :^)
> 
> If you've got an ICD2 already then the only other thing you
> really need 
> is Microchip's free MPLAB IDE - download it direct from
> them here:
> 
> http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en019469∂=SW007002
> 
> Lots of documentation, support forums, etc at that site as
> well...
> 
> Eric
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> 
> -- 
> Harry Bissell & Nora Abdullah 4eva
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>