[sdiy] Part help

[Mike Gorman]

Rico,

I'm building one of these myself and you can find all of the awkward parts
on the Curetronic Rare Parts page, here:

http://www.curetronic.com/curetrbau/neubau/parts.htm

The MC4558's, that aren't on this page aren't too hard to find. The prices
here are not the cheapest, but it may be easier to one-stop shop. 

A few other gotcha's with this circuit are:

1. The SK30A-GR's should be matched, if you are buying them from elsewhere,
you may need to buy quite a few and match them yourself.
2. Watch out for the 2 of 10u non-polarised electrolytics for C4 and C9.
3. C5 to C8 should be Polystyrene foil type capacitors.
4. You need an NTC 10k thermistor for the part SDT-1000, this is also
available from the link above.
5. I've found the PCB's quite difficult to solder, as they aren't tinned
(well they were only 9 Euros), so oxidise easily. Either thoroughly clean
the PCB before soldering, or tin and/or desolder the pads before mounting
the components.

Have fun building it.

Regards

Magman

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Rico Loverde
Sent: 16 January 2011 03:06
To: synth-diy at dropmix.xs4all.nl
Subject: [sdiy] Part help

Hey guys, I'm putting an order together so I can finish a few
projects. One of them being a curetronic 100m VCf clone. I'm having a
he'll of a time finding the ics and semis. Here is a list of what I'm
having problems finding. If you know of an alternative, or somewhere
to order from that'd be awesome. Also helpful to know if they are out
of print...

Very psyched to be building again

Ics and semis:

BA6110 (ic 2,3,4,5)
MC4558 (ic 1)
SK30A-GR (q1,2,3,4,)
2SC1815Y (q 5,6)
2SA1015Y (q 7)

Also couldn't find ferrite beads on mouser or jameco???????

-- 
________________
rico loverde
415.596.6255
ricoloverde.com
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy