[sdiy] Part help

[David]

Nikko (Dalbani, www.dalbani.co.uk) shows stock on these parts. You'll have
to contact them to make sure they have what you want. I've had good luck
with them in the past.

I use these beads from Mouser:
http://www.mouser.com/Search/ProductDetail.aspx?R=BL01RN1A2A2Bvirtualkey6480
0000virtualkey81-BL01RN1A2A2B

Mouser p/n 81-BL01RN1A2A2B
Murata p/n BL01RN1A2A2B

David


-- -----Original Message-----
-- From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-
-- bounces at dropmix.xs4all.nl] On Behalf Of Rico Loverde
-- Sent: Saturday, January 15, 2011 8:06 PM
-- To: synth-diy at dropmix.xs4all.nl
-- Subject: [sdiy] Part help
-- 
-- Hey guys, I'm putting an order together so I can finish a few
-- projects. One of them being a curetronic 100m VCf clone. I'm having a
-- he'll of a time finding the ics and semis. Here is a list of what I'm
-- having problems finding. If you know of an alternative, or somewhere
-- to order from that'd be awesome. Also helpful to know if they are out
-- of print...
-- 
-- Very psyched to be building again
-- 
-- Ics and semis:
-- 
-- BA6110 (ic 2,3,4,5)
-- MC4558 (ic 1)
-- SK30A-GR (q1,2,3,4,)
-- 2SC1815Y (q 5,6)
-- 2SA1015Y (q 7)
-- 
-- Also couldn't find ferrite beads on mouser or jameco???????
-- 
-- --
-- ________________
-- rico loverde
-- 415.596.6255
-- ricoloverde.com
-- _______________________________________________
-- Synth-diy mailing list
-- Synth-diy at dropmix.xs4all.nl
-- http://dropmix.xs4all.nl/mailman/listinfo/synth-diy