[sdiy] 2 x Euro panel design questions

[Justin Owen]

-----Original Message-----
From: Andre Majorel [aym-htnys at teaser.fr]
Received: 12.01.2011 11:48:19
To: synth-diy at dropmix.xs4all.nl
Subject: Re: [sdiy] 2 x Euro panel design questions

On 2011-01-12 10:53 +0000, Justin Owen wrote:

> On narrower Eurorack panels - let's say 8HP or less, most
> manufacturers seem to put one mounting hole at top and bottom
> (rather than two - which is fair enough) - but they're
> generally mounted to one side of the panel rather than in the
> middle. Even on 4HP modules this seems to be the standard. Is
> there a reason for this (i.e. why not centre mount the holes)?

We just discussed this.

http://dropmix.xs4all.nl/pipermail/synth-diy/2011-January/029538.html
http://dropmix.xs4all.nl/pipermail/synth-diy/2011-January/029551.html

-- 
André Majorel http://www.teaser.fr/~amajorel/

I missed that - thanks for the link.

My problem was actually down to not properly lining up my front panel layout with my rack template in Illustrator. Sussed it as soon as I made a cardboard mock-up.

That thread was helpful though - cheers.

J