[sdiy] ARP2601 question

[Bob Weigel]

On 2/26/2011 12:41 PM, Dave Manley wrote:
> On 2/25/2011 9:12 PM, Bob Weigel wrote:
>> I just have the 2600 downloads of course on this. I have an odd thing 
>> that might be just something not configured right etc. Both speakers 
>> make good sound..but
>>
>> 1) pan to the right and all sound pans to zero.
>>
>> 2) You can put a plug in the left in, tap and get a buzz..not so in 
>> the right in
>>
>> 3) neither reverb works at the moment..it appears there is reverb 
>> amount to right and left or am I misunderstanding those controls?
>
> What you're describing is weird - if both left and right speakers work
> then there shouldn't be any way panning to the right causes both left
> and right speakers off.
>

That's how it appears on the schematic I'm looking at :-).  Quite 
strange.  I'm getting levels that sound like it's in mono mode with the 
volume slider on the left by the speaker there having control over BOTH 
speakers!!  The right volume does absolutely nothing that I can detect.  
The pan again repeats the function of the left speaker volume slider 
basically.  yes the pan works smoothly.  I know.  Bizarre eh? Maybe 
someone jacked something around because an amp went down on one side or 
something. -Bob