[sdiy] A little OT, Begging a hand

[Veronica Merryfield]

It is a 2 position, pressure and position sensor. Pressures are R4 and R5, positions from R1, R2 and R3, or rather the distance between positions. 

I have a test system running that gives me the various voltages from different drives and I can see the variables in the bargraphs. I have also run a simulation outputting to a CSV files so I can mess with graphs. I can see some of the relationships between the Vout plots and the variables but not all.  

I therefore needed new input to see if there are other paths to investigate. I think I have got close to finding  a solution with the simulation and graphing but not quite close enough.

On 2011-02-08, at 4:17 PM, Dave Manley wrote:

> Hi Veronica,
> 
> I'm curious if you are willing to comment on the nature
> of the sensor and/or how you'll apply it.
> 
> -Dave
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy