[sdiy] Using Cortex Mx Arms in Synth DIY

Gabriel Lindeborg gabriel at lindeborg.org
Mon Dec 26 23:07:07 CET 2011


Can we get back to SDIY, please?

//Gabbe

BARRY KLEIN skrev 2011-12-26 20:47:
> I basically agree, but just bought a Asus motherboard and I7 2600K as my power supply killed my old
> one and the next one I bought to replace it.  Turns out the supply has a 10V spike on AC turn on on the USB
> 5.1V standby.  Other than that it seemed fine - but opening it up I found almost all electrolytics were bad.
> So if this happens to you be sure to check the voltage at power on.  I have two A8n-SLI boards bad now.
> I tried replacing the power management chip that gets hot but the issue continues so there is something loading it
> down.  I don't have any mb schematics to go further and haven't found a good website that goes to this
> level of repair detail.  I'd like to continue to use some of the programs I will lose going to the new system and OS.
> Not a well known happenstance but just backing up your data doesn't get you back 100% on a different
> motherboard - you likely won't even get the board to come up.  I'd think macs have this same issue...?
> {sorry for people that hate pc discussions...)
>
> Barry
>
> On Dec 26, 2011, at 11:02 AM, thx1138 wrote:
>
>> On 12/24/11 6:24 PM, "BARRY KLEIN"<barryklein at cox.net>  wrote:
>>
>>> And many of those running Bootcamp or whatever and Windows 7...
>>>
>>>
>>> On Dec 24, 2011, at 3:44 PM, Gordon JC Pearce wrote:
>>>
>>>> On Sat, 24 Dec 2011 11:22:00 -0800
>>>> thx1138<thx1138 at earthlink.net>  wrote:
>>>>
>>>>> Yes, I am also a Mac User and Pc is a piece of sheiss!.
>>>> Funny, considering that hardware-wise all the "modern" Macs are just very
>>>> cheap commodity PCs...
>>>>
>>>> -- 
>>>> Gordon JC Pearce MM0YEQ<gordonjcp at gjcp.net>
>>>> _______________________________________________
>>>> Synth-diy mailing list
>>>> Synth-diy at synth-diy.org
>>>> http://synth-diy.org/mailman/listinfo/synth-diy
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at synth-diy.org
>>> http://synth-diy.org/mailman/listinfo/synth-diy
>> Hi All,
>>
>> First of all , the quality control on PC motherboards is all over the map.
>>
>> Just try getting ProTools working under Windows on a Dell, SONY, Toshiba ,
>> etc. The results are really weird to be sure.
>>
>> Run the same Hardware from AVID on a Mac Tower and the results are pretty
>> consistent.  The MAC OS is a heck of a good deal more stable on a MAC vs. PC
>> hardware platform.
>>
>> My Mac Pro Lap top runs Windows XP from VMWare Fusion and it boots up
>> Windows a good deal quicker.
>>
>> Linux on my Mac Pro seems pretty stable and runs fast. I use my old laptops
>> for Linux and they are better than Windows XP/ Win 7.
>>
>> Draw your own conclusions, I use my MAC more often these days due to
>> reliability.
>>
>> Terry
>>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy



More information about the Synth-diy mailing list