[sdiy] Paia 1550 Stringz n Thingz not sustaining

[Analog/DIY]

Travis, looking at the construction manual it looks like you might want to check D2, D3 and Possibly C2. 

Sent from my iPad

On Aug 22, 2011, at 10:27 PM, Travis Thatcher <recompas at gmail.com> wrote:

> I have a 1550 I'm working on and I'm a little stuck on the decay time
> for both the strings and piano sounds.  There is very little
> difference between minimum and maximum decay time using the controls
> (or using a footswitch). I checked and the pots are varying the
> voltage as they should be going to the sustain busses.  Does anybody
> have any suggestions on what components could be bad (diode, cap?) to
> cause this behavior?
> 
> Thanks,
> Travis
> 
> -- 
> http://www.travisthatcher.com
> http://www.voiceofsaturn.com
> http://voiceofsaturn.blogspot.com
> http://www.judichicago.com
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy