[sdiy] saw core VCO tuning/scaling (Roland SH-2)

[Magnus Danielson]

On 19/08/11 01:38, Adam Inglis wrote:
> Magnus, many thanks
>
> The Roland SH-2 SM PDF can be found here..
>
> http://manuals.fdiskc.com/flat/
>
> The VCOs are on page 4
>
> Thanks for your time - I'll see if I can find a pin-out to find this
> "oven-setting resistor"

As I mentioned in an email to Dan, the feedback resistor/pot for the 
summing amp is sitting on another board. Both the feedback potentiometer 
and the connections is something to check carefully.

Cheers,
Magnus