[sdiy] Measuring filter response

[Harry Bissell]

If you don't use a storage scope its pretty tough to view lower frequencies...

H^) harry

----- Original Message -----
From: David G Dixon <dixon at mail.ubc.ca>
To: 'Neil Johnson' <neil.johnson97 at ntlworld.com>, synth-diy at dropmix.xs4all.nl
Sent: Mon, 15 Aug 2011 15:45:30 -0400 (EDT)
Subject: Re: [sdiy] Measuring filter response

I once read in an old textbook (pre-computer, pre-digital scope) about using
a slow sawtooth to ramp the filter frequency, and also using this saw to
trigger the scope, then just feeding a sine to the filter and looking at the
response.  Has anybody tried that?

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

-- 
Harry Bissell & Nora Abdullah 4eva