[sdiy] Will someone please measure two trimpots in EmulatorII power supply ?

[Gil W.]

OK just for documentation:

Zom from the Emulator II yahoo group has reported these values measured across these two trimpots:
 
R110 : 1.39 (measured at 20k ohm range)

R109 : 42.1 (measured at 200k ohm range)






--- On Mon, 8/8/11, Gil W. <gil_we at yahoo.com> wrote:

> From: Gil W. <gil_we at yahoo.com>
> Subject: [sdiy] Will someone please measure two trimpots in EmulatorII power supply ?
> To: "synth-diy at dropmix.xs4all.nl" <synth-diy at dropmix.xs4all.nl>
> Date: Monday, August 8, 2011, 11:14 PM
> Hello friends.
> 
> As I posted before, I have a little trouble with my E-II. I
> recapped the power supply, and mistakenly tweaked the two
> trimpots marked R109 and R110, both appearing on the right
> side of the power supply circuit. It appears there is not
> calibration procedure for them available, so the only way I
> can set them back to their "factory" positions is to get the
> values from another E-II... Will any of you be kind enough
> to measure these two trimpots in his E-II and let me know
> the values across their legs (as set in the factory) ? 
> this way I will be able to set them back to where they
> should be, and make use of my E-II again....
> 
> Thanks very much for the help !!
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>