[sdiy] Korg Poly61 a peculiar design!!

[m.bareille at free.fr]

Hi

I have a Poly61 too but with a dead keyboard. The keyboard is the true weak
point of this synth, and there is no MIDI(sic)

I had +/- in mind to design a special MIDI interface for it to emulate the
keyboard.

To rebuild /hack the cpu board seem to be a lot of work to do anyway , but
nothing impossible , just time consumming.

A programmer like my MCV32 ( or like) could probably do the job to manages CVs
and extra panels pot. I have adapted this board to replace the CPU into many RSF
PolyKobold who are much morecomplex devices  , so it should work on a Poly61 ,
but this will not replace the keyboard anyway.

I am interested  by a readable schematic , at least to help me to decide what
todo with this synth who is taking dust here since many years ...

Thanks,

Marc B.




>
> I do have some actual paper on this model,  if anybody wants it.  I'd have to
> dig a bit to be sure of exactly what I have,  though...
>
> > KD
> > --- Den ons 2011-04-06 skrev Tom Wiltshire <tom at electricdruid.net>:
> >
> > > Have you got a link to some decent
> > > schematics for the Poly 61, Karl?
> > >
> > > I've got a service manual PDF for it, but it's more-or-less
> > > unreadable.
> > >
> > > Thanks,
> > > Tom
>
>
> --
> Member of the toughest, meanest, deadliest, most unrelenting -- and
> ablest -- form of life in this section of space,  a critter that can
> be killed but can't be tamed.  --Robert A. Heinlein, "The Puppet Masters"
> -
> Information is more dangerous than cannon to a society ruled by lies. --James
> M Dakin
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>