[sdiy] A few bits for sale (UK)

[Tom Bugs]

  Hi all,

Some of you may know that I moved my workshop recently.
(now looks a bit like this: 
http://bugbrand.co.uk/images/ninetreehill/13Sept2010_Workshop.jpg)

I've been sorting a lot of things out and been trying to get rid of 
stuff that I don't use any more. I have a few bits that may be 
interesting for SDIY people so here goes:::
(many of these items are going to be UK only due to size or power 
requirements!)

Any questions please ask.
Thanks for the bandwidth!
Tom

*********************************

2 x Aoyue 486 fume extractor fans --
one doesn't have the clip to hold in the active carbon filter. The other 
one does and there's a spare filter. You have to put them quite near to 
where you're working for them to be really effective. They seem to be 
£20 new so how about £20 for the pair of them?
http://www.pcb-soldering.co.uk/index.php?target=products&product_id=40
http://bugbrand.co.uk/images/forsale/FumeExtract.jpg - pic. of the two 
of them - fine, only a year or two old, just a little dusty from the move!

Aoyue 950 SMD Tweezer Iron -
almost new & still in box - pretty sure it still has absolutely 
everything in the box & I'll throw in a little vacuum pickup tool. New 
they're over £50 so how about £30?
http://www.pcb-soldering.co.uk/index.php?target=products&product_id=27
http://bugbrand.co.uk/images/forsale/Aoyue950Tweezer.jpg

Cliff WF2 PCB Assembly Jig -
bought new from Rapid a year or two ago - I used this for a bit but 
didn't totally gel with it. Is still in good condition and is the larger 
version of the two offered here:
http://www.rapidonline.com/Tools-Fasteners-Production-Equipment/PCB-Equipment/Accessories/PCB-Assembly-jig/29481
New cost is over £150. I'd be happy to take £70 plus postage - probably 
UK only!

A box load of blank/undrilled Frac size aluminium c.3mm panels - 
definitely UK only!
I got these made up for my DIY a few years ago - they are mainly black 
anodized, but there are a few plain (with plastic covering). Now, the 
actual sizes were not completely accurate but I was perfectly happy with 
them --> the black ones tend to be around 1mm less than standard Frac 
size/width while the plain ones tended to be just a bit over! There's 
not much in it. Note that quantities are quite rough (under-estimated!) 
- most are still wrapped in paper as I got them but I can't guarantee 
they'll all be perfect - mostly they will be though!
Of interest to anyone? I used to use a CNC to engrave the black ones -> 
ie engrave through the anodized black and show the metal underneath.
I really don't know what to ask for these - it must be several kilos of 
solid! Happy to take any lowball offer if these are of interest.
Rough Quantities are:
Black anodized aluminium:
1width (1.5"x5.25") x 30 ,, 2width (3"x5.25") x 30 ,,3width (4.5"x5.25") 
x 20 ,, 4width (6"x5.25") x 20
Plain aluminium:
2width (3"x5.25") x 8 ,, 3width (4.5"x5.25") x 6
http://bugbrand.co.uk/images/forsale/FracPanels.jpg

2 Busted-up pedals! – NEXT Flanger with MN3007/MN3101 + Ibanez CS9 
Stereo Chorus with MN3207/MN3102 – NEXT working a bit, Ibanez totally 
not sure! I dunno -- ?? £15 for the pair perhaps? The Next has knobs, 
the ibanez doesn't - they both have pots/jacks/cases with baseplates..
http://bugbrand.co.uk/images/forsale/Pedals.jpg

Two trays of ALPS pots with metal DShafts I got off ebay a while back. 
They're all as-new in trays of, I think 100 each. I have some bags of 
nuts for them and they require a 9mm panel hole. Measured the shafts as 
6mm diameter.
Ideally I'd like to sell these all together?! Or is that stretching it...
c.3 trays (300 pots) of 50k A Log pots £40
c.5.5 trays (550 pots) of 50k B Linear pots with centre-click £55
Or have them all for £80 (+ Shipping -- quite heavy so possibly UK only!)
http://bugbrand.co.uk/images/forsale/TrayofAlps.jpg

130 x Chickenhead Knobs from Rapid - they're chunky, certainly compared 
to some other ones I've seen.
They cost 27p each in quantities over 100 - what about £25 for 130 of 
them? 100 sealed in box, 30 in bag
http://www.rapidonline.com/Tools-Fasteners-Production-Equipment/F 
asteners-Fixings/Knobs/Black-pointer-knob/31328

160 x 20mm Boss knob - bought new off Ebay (hongkongsuperseller) with 
prices around £38 per 100 - how about £40 for all of them?

Knob images:: Chickenhead Left, Boss style Right - 
http://bugbrand.co.uk/images/forsale/knobs.jpg

***********************************
Thanks all!

-- 
BugBrand LTD
UK company No. 07199808
VAT No. GB 988 2629 57
1 Ninetree Hill
BRISTOL BS1 3SB
United Kingdom
www.bugbrand.co.uk