[sdiy] Cascading/Switched multiples schematic?

[Julien Delgoulet]

Don't know if you might be interested but I've made a circuit with buffer op-amp that can do two "1 input -> 4 outputs"  or single "1 input ->8 outputs" (when a switch is on).
I can send you the eagle circuit and board if you want.

Julien

Le 14 sept. 2010 à 13:36, Justin Owen a écrit :

> Hey again,
> 
> Can anyone point me in the direction of a schematic or some info on how to build a switched/cascading multiple?
> 
> Basically I want 1 x socket to act as an input which then sends that signal to the other 7 outs - until something is plugged into (e.g.) socket 5 in which case signal/input 1 (socket 1) will appear at outputs 2/3/4 and signal/input 2 (socket 5) will appear at outputs 6/7/8 - and (ideally) so on and so on.
> 
> Oh - I'm not sure if it will affect the design - but I'd like all I/O to be buffered.
> 
> Make sense? Advice? Thoughts, etc? Nice one.
> 
> Cheers: J
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy