[sdiy] transformer shielding question (typo)

[Stewart Pye]

Dave,

I'd use a toroidal too. There's not much difference in price these days, 
and they are generally easier to mount.


Regards,
Stewart.


Paul Perry wrote:
> I don't know any way - particularly since the orientation
> of the transformer can be a major factor.
> Personally, if hum pickup was likely to be a problem, I would
> think of getting a toroidal transformer - these have much less
> radiated field.
> In this case, I'd build it without bolting in the transformer, then
> see how it went, while leaving enough room to allow for moving
> the transformer about before you fixed it in place.
>
> paul perry melbourne australia
>
>
> ----- Original Message ----- From: "Dave Kendall" > Is there any way 
> to work out a safe distance, apart from "suck it and
>> see"?
>>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>