[sdiy] JOMOX

[Magnus Danielson]

On 10/21/2010 02:17 PM, Gergo Palatinszky wrote:
> Jörgen did some steps towards this with his AMORE standard ...
> http://hem.bredband.net/bersyn/amore.htm
> I've discussed with him to extend/open the AMORE (let's say to L'AMORE :O))) Large-amore which allow more pins) as I see it's difficult to use it for most of the new modules which spreaded in the list... however he reject this... resoning very same what you mantioned below - that it's difficult to define the limit, but it should be deifined...
> 	
> However is see some chance to specify some bits ot parts which can be very useful later on might become as standard ... like a digital sub-module which can be placed onto all of the voice/signal generating/maipulation modules ... which can say for "motherboard":"Hejj I'm JH Living VCO, after the standard pins(+,-,AGND,DGND) I have pin x for singal inputs/outputs, pin x is for control which stands for ... which needs which kind of CVrange/encoder control signal ...
> And as you mentioned some HW spec for the cards are needed like 64pin connector max dimension, (digital interface should be common/standard)

Would require quite a capable motherboard which the AMORE doesn't need.

For it to be workable a bit more standard would be required. CVin, 
CVouts, etc would have fixed location so CV out 9 always sits in the 
same location if used. You would also require them to be used in the 
numbered order so you don't skip CV out 4-8 for instance.

Cheers,
Magnus