[sdiy] JOMOX

Harry Bissell harrybissell at wowway.com
Thu Oct 21 15:33:51 CEST 2010


sounds like the "Chameleon"

H^) harry



----- Original Message -----
From: Gergo Palatinszky <Gergo_Palatinszky at epam.com>
To: synth-diy at dropmix.xs4all.nl
Sent: Thu, 21 Oct 2010 04:50:13 -0400 (EDT)
Subject: Re: [sdiy] JOMOX

Hi,

All the time when I see this kind of projects/synths I'm really wondering that we cannot develop an open HW+SW platform basically a synth motherboard where everybody can develop an own module ... digitally controlled switching/routing matrix for audio/control voltages ...several controller(encoder) which can be assigned to a module(for a time being to set and save parameters there) a bus system where 16-24-32-... independent module can be plugged in - can be changed easily (different modular config can be set very fastly)
Each module have a digital part for controllers assignment and for storing control parameters ...

At least it would be nice to start a specification round to see that this kind of community could be able to do it or not.... might comercial modular manufacturer can join to it ...

Br,
	Pala

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of cheater cheater
Sent: 21 October 2010 10:32
To: David G. Dixon
Cc: synth-diy at dropmix.xs4all.nl
Subject: Re: [sdiy] JOMOX

Yeah, and both the hardware and software are buggy as hell. And
insanely expensive. Maybe you're an ape but at least you don't trip
over all the time while walking.

BTW doesn't sound that amazing either.

Cheers,
D.

On Thu, Oct 21, 2010 at 10:06, Gergo Palatinszky
<Gergo_Palatinszky at epam.com> wrote:
> Hi,
>
> They request the price for "discrete soldering" (and for R&D) as this is about 5000 EUR  :O)
>
> OK I'll buy at least 22 JOMOX now! :O)))
>
> Best Regards,
> Gergo Palatinszky
>
> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Dave Manley
> Sent: 21 October 2010 09:01
> To: synth-diy at dropmix.xs4all.nl
> Subject: Re: [sdiy] JOMOX
>
>  On 10/20/2010 10:17 PM, David G. Dixon wrote:
>> The videos were actually put up by someone called "spainwaxlove".  TW just
>> had them in his favorites list.
>>
>
> Ah...thanks, that helps a lot:
>
> http://www.youtube.com/user/spainwaxlove
>
> So...the German dude is Jürgen Michaelis of Jomox.
>
> Someone should show him the quick way to solder surface mount ICs.  Life is too short to solder one leg at a time!
>
> -Dave
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

-- 
Harry Bissell & Nora Abdullah 4eva



More information about the Synth-diy mailing list