[sdiy] PCB mounting tips

[Harry Bissell]

I've never had good success with epoxy and standoffs. They always break
away from the metal even if I make the surface rough and clean it well
first.

what epoxy do you use ?

H^) harry


----- Original Message -----
From: Adam Schabtach <lists at studionebula.com>
To: synth-diy at dropmix.xs4all.nl
Sent: Sun, 17 Oct 2010 17:43:26 -0400 (EDT)
Subject: Re: [sdiy] PCB mounting tips

I like using epoxy to mount the standoffs to the back of the panel. That way
you don't add any screw heads to the front of the panel.

--Adam

> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-
> bounces at dropmix.xs4all.nl] On Behalf Of David G. Dixon
> Sent: Sunday, October 17, 2010 1:53 PM
> To: synth-diy at dropmix.xs4all.nl
> Subject: [sdiy] PCB mounting tips
> 
> Hey Team,
> 
> Does anyone have any tips for mounting a PCB/stooge bracket to a panel
which
> contains only open-frame jacks?  I'm thinking I'll probably have to use
long
> standoffs screwed to the panel between the jacks, but I'd be interested to
> hear any other ideas.
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

-- 
Harry Bissell & Nora Abdullah 4eva