[sdiy] plastic serrated edging

[Dave Manley]

On 11/29/2010 4:06 PM, Tim Parkhurst wrote:
> On Mon, Nov 29, 2010 at 3:45 PM, David Brown<davebr at earthlink.net>  wrote:
>> I need several feet of plastic / nylon serrated edging that I can put on the
>> edge of thin sheet metal, 0.050" or less in thickness.  I need it pretty
>> flexible to go around the inside corners of some irregular holes to protect
>> wiring that goes through them.

How about tubing of the correct diameter that you've slit with a razor?

Cheap, flexible, and available, but might require some adhesive.

If I went that route I'd be tempted to build a small wood fixture
with a hole drilled to guide the tubing against the blade - controls
the cut and makes it less likely to slit your finger :-0!

-Dave