[sdiy] Midi to Gate with Velocity?

[Laurie Biddulph]

The unit was called MID2SDS which was designed by Paul Maddox as a 
MIDI-Trigger converter, essentially for SDS equipment.
The MID2SDS has been updated and is now offered in a Eurorack format as the 
ED103-MID2SDS.

The current version supports both TRIGGER mode and GATE mode and has 
velocity dependent outputs. The outputs can be positive going or negative 
going and the output voltage can be adjusted to below 0V and up to 10V.

Regards
Laurie Biddulph

Mobile: 0400 257 645
Elby Designs
www.elby-designs.com
ABN: 70 022 727 605

--------------------------------------------------
From: "JH." <jhaible at debitel.net>
Sent: Wednesday, May 05, 2010 1:38 AM
To: "megaohm" <megaohm1 at gmail.com>
Cc: <synth-diy at dropmix.xs4all.nl>
Subject: Re: [sdiy] Midi to Gate with Velocity?

> Hmm.
>
> The reason why I was asking:
> Ever since I built this PS-3200 clone, I thought it had two shortcomings:
>
> It should have individual oscillators, like the PE1000, and it should have 
> some sort of dynamic expression.
>
> I thought about making PCBs for something like that in the future, but I 
> wouldn't rely on everybody using a real keyboard for
> something like that.
>
> JH.
>
> ----- Original Message ----- 
> From: "megaohm" <megaohm1 at gmail.com>
> To: "JH." <jhaible at debitel.net>
> Cc: <synth-diy at dropmix.xs4all.nl>
> Sent: Tuesday, May 04, 2010 5:18 PM
> Subject: Re: [sdiy] Midi to Gate with Velocity?
>
>
> There is the MIDISDS2. Name is probably wrong but it is a P. Maddox design
> and I think Elby offers it now. This is not gate. It is trigger instead.
> Trigger level determined by velocity. Eight separate outputs.
>
> p.
>
>
> On Tue, May 4, 2010 at 5:23 AM, JH. <jhaible at debitel.net> wrote:
>
>> Just out of curiosity:
>>
>> does anybody offer something like that?
>> I know there are several Midi-to-Gate interfaces on the market, with
>> something like 64 Gate outputs.
>>
>> But I'm thinking of the same thing, with 64 velocity-scaled voltage
>> outputs.
>> Can't be too hard to implement, with a fast DAC and fast demultiplexing -
>> but is it readily available?
>>
>> JH.
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>