[sdiy] sliders on panels

[Elby Designs - Laurie Biddulph]

Don't know if this is of any interest but I have a small pcb that will hold up to
8 60mm sliders and requires only 4 holes to mount it. Boards can be stacked
side-by-side for larger banks and was designed to fit behind a 3U panel.
Pop over to my website at
http://www.elby-designs.com/synth-modules/slider/slider.htm for more details

Best regards
Laurie Biddulph
www.elby-designs.com
Mobile: 0400 257 645

On Fri Mar 26 10:37 , Tom Arnold  sent:

>On Thu, Mar 25, 2010 at 11:32:21PM +0100, Tom Adam wrote:
>> use a second plate to mount the sliders on and mount this second plate 
>> to the front panel.
>
>Its generally been agreed on the Klee build lists that using a subframe
>plate to mount the sliders works best as you can then hide the actual
>mounting screws of the sliders.  Might want to search the web for Klee build
>pictures for some ideas, I think they'd be applicable to your mixer.
>
>-- 
> -----------------------------------------------------------------
> - Tom Arnold       -  Free Synth DIY webspace http://www.sdiy.org 
> - SynthGeek        -
> - BBD Fanatic      -  "...is it a virus, a drug, or a religion?" 
> - echo evho wjxo   -    Juanita Shrugs. "What's the difference?" 
> --------------------  
>
>_______________________________________________
>Synth-diy mailing list
>Synth-diy at dropmix.xs4all.nl
>http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>)