[sdiy] Euro Knobs/Jacks?

[Benjamin Budts]

If you have leftovers from those 1000's I'd like to buy say 100 or 
more... I'm also making my own eurorack modules.

you can contact me off-topic.

cheers,
Ben

Dave Kendall wrote:
> Last time I looked into this, the jack sockets were Cliff 13841. The 
> 13841s are more tolerant of different shaped tips (far eastern) than 
> the earlier 1384 model, which had caused some reliability problems 
> with earlier doepfer gear.
>
> A couple of years back, a friend and I did a bulk order direct with 
> Cliff UK, who were helpful, and the jacks worked out around £0.33 GBP 
> each, but we had to buy 1000 as a minimum order.
> I have read since that some guys stateside have had problems getting a 
> similar deal from Cliff USA.
>
> cheers,
> Dave
>
>
>
>
>
> On Feb 25, 2010, at 06:17, Sam Ecoff wrote:
>
>>
>> Does anybody know what knobs and jacks are used on Doepfer modules? I 
>> found these knobs at mouser, but I'm unsure If they're right:
>> P570H-08-S6
>>
>> Thanks!
>>
>> Sam E.
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>