[sdiy] roland tr606 clock issues

[Travis Thatcher]

I checked my cable, and all 5 pins are connected.  I'm going to guess
its a bad transistor somewhere or perhaps a bad chip? any ideas? like
I said, the start/stop button will turn the led on and off, but not
start and stop the pattern. i check the ribbon cables and the wires
running from the switch board to the main one and they seem fine.

-Travis

On Mon, Jun 14, 2010 at 9:36 AM, Travis Thatcher <recompas at gmail.com> wrote:
> I completely forgot about that! i need to check my cable to make sure
> all 5 pins are wired.  still, doesn't solve the clock problems of the
> device running on its own.
>
> thanks,
> -t
>
> On Mon, Jun 14, 2010 at 3:52 AM, ian taylor <ioddity2001 at hotmail.com> wrote:
>>
>> Just a quick thought - I don't want to be patronizing but are you using an ordinary midi cable for the din sync?
>> They don't work and could cause some sync issues - you need to get a suitable one.
>> Sometimes sync can be set +/- from the device transmitting - If its wrong I wonder if this could also cause sync issues?
>>
>>
>> _________________________________________________________________
>> http://clk.atdmt.com/UKM/go/195013117/direct/01/
>>
>
>
>
> --
> http://www.judichicago.com
> http://www.myspace.com/judichicago
> http://www.recompas.com
> http://voiceofsaturn.blogspot.com
>



-- 
http://www.judichicago.com
http://www.myspace.com/judichicago
http://www.recompas.com
http://voiceofsaturn.blogspot.com