[sdiy] CV inputs with bipolar "amount" knobs

[Harry Bissell]

You can use just about any values, the two resistors in the inverting path must be the same value, and the
pot can be anything.

Higher values of POT will give higher input impedance, which is NOT constant btw. It changes with the pot setting.

I'd use two 50K in the inverting path, and a 100k pot so that at center rotation, the circuit
looks exactly like a proper differential amp with the inputs tied to the same point. This would be best
for input offset current etc... (best matching)

H^) harry



----- Original Message -----
From: Tom Wiltshire <tom at electricdruid.net>
To: bbob <rdrake at data2action.com>
Cc: Synth DIY <synth-diy at dropmix.xs4all.nl>
Sent: Mon, 19 Jul 2010 10:46:38 -0400 (EDT)
Subject: Re: [sdiy] CV inputs with bipolar "amount" knobs

Thanks everyone.

The Fonik design and the EFM VCA5B design are basically the same; a differential amp fed with one signal. One thing I don't understand though - they used 47K/47K for the inverting feedback, but a 50K pot for the non-inverting feedback (essentially a 25K/25K split). Just for the symmetry of it, I'd have wanted to use a 100K pot here. Can anyone think of a reason why I shouldn't?

Thanks again,
Tom

On 19 Jul 2010, at 15:00, bbob wrote:

> i think, check out the first section of fonik's dual voltage processor:  http://modular.fonik.de/pdf/dual%20voltage%20processor.pdf
> 
> On Mon, Jul 19, 2010 at 9:24 AM, Tom Wiltshire <tom at electricdruid.net> wrote:
> Hi All,
> 
> I know various people have built various devices with CV inputs that have bipolar "amount" knobs so that you can easily invert a CV input - particularly useful for envelopes and such like.
> 
> How many different ways of doing this are there? Can anyone provide a reference to a schematic online?
> 
> I just had a big hunt around thinking I'd find loads, but mostly they must be parts of other circuits 'cos I couldn't find any.
> 
> Any pointers appreciated.
> 
> Thanks,
> Tom
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> 

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

-- 
Harry Bissell & Nora Abdullah 4eva