[sdiy] LM317 LM337 adjustable regulators

[David Ingebretsen]

Thanks John. I had missed the minimum load requirement in the data sheet.

Thanks for the help.

David

~~ -----Original Message-----
~~ From: John Luciani [mailto:jluciani at gmail.com]
~~ Sent: Saturday, July 17, 2010 5:16 PM
~~ To: David Ingebretsen
~~ Cc: Synth DIY
~~ Subject: Re: [sdiy] LM317 LM337 adjustable regulators
~~ 
~~ The minimum load is 10mA for the National
~~ part. The regulation is specified at 1% for loads between minimum and
~~ full load. It sounds like normal behavior to me.
~~ 
~~ (* jcl *)