[sdiy] Korg Monotron... Korg 35 chip?

[HOSHUYAMA]

Hello Dan,

74HC14 (maybe AHC) is used just as a schmidt trigger or an inverter
to reset an integrator.  The integrator and reset switch is like 
Moog VCO with a JFET buffer followed by 2 HC14 inverters.

Sam HOSHUYAMA
Saitama, JAPAN

dan snazelle wrote:
> any ideas on how they are implementing the  74HC14 as a vclfo?
> thanks so much for this info
> 
> 
> 
> 
> On Jul 4, 2010, at 11:34 AM, HOSHUYAMA wrote:
> 
> > Hello list,
> > 
> >>> Would that also mean that I could use one Monotron as 
> >>> highpass, and one as lowpass?
> >> 
> >> Good question - so far I have not seen a mod to reconfigure a Monotron for
> >> the highpass filter (which may mean it is difficult). Can't wait to get my
> >> hands on one to see how do-able that is! But note that the Monotron isn't
> >> using the Korg35 per se, just the same arrangement of transistors that are
> >> in the Korg35 (as far as I can tell from the various photos of it around the
> >> web).
> > 
> > I already succeeded at adding a high pass input to the monotron filter
> > in an experiment.  But, it is difficult to change the signal pass on 
> > the PCB with tiny SMDs.  Actually, I broke a PCB and had tough time 
> > to recover.  So I did not use high pass configuration in my modification.
> > 
> > Additional info for those who are thinking of modifying a monotron.
> > Correcting my English is welcome.
> > 
> > - DC-DC converter is used.  Stable 5V is generated from 3V or less.
> > - A bias voltage 1.35V generated by an opamp from 5V is used for virtual grounding.
> > - 74HC14 is used for VCO and VCLFO.
> > - The left LM324 is for gate generator, VCO CV mixer, and exponential converter.
> > - The right LM324 is for VCF CV mixer, VCF signal mixer/attenuator, and VCF buffer.
> > - 6-pin chip beside the left 324 is a pair transistor for VCO.
> > - Large 3-pin SMDs are N-channel JFETs.
> > - Small 3-pin SMDs are bipolar transistors.
> > - SMD capacitor values can not be seen.  (tiny brown SMDs)
> > - Resistor values are easy to read. (tiny black SMDs)
> > - A 3.5mm jack has 4 terminals: chip, 1st ring, 2nd ring, and 3rd ring (ground).
> >   In the external input jack, 2nd ring is used to turn off the gate signal to VCF.
> >   In the headphone output jack, 2nd ring is used to control the power amp IC to
> >   mute the loudspeaker.
> > 
> > Best,
> > 
> > Sam HOSHUYAMA
> > Saitama, JAPAN
> > 
> > "Tim Stinchcombe" wrote:
> >>> Hey all, has anyone else noticed the Korg Monotron?
> >> 
> >> Reckon so...
> >> 
> >> A couple of recent threads at Muffwiggler:
> >> 
> >> <http://www.muffwiggler.com/forum/viewtopic.php?t=14577&postdays=0&postorder
> >> =asc&start=0>
> >> 
> >> <http://www.muffwiggler.com/forum/viewtopic.php?t=18358&start=0&postdays=0&p
> >> ostorder=asc&highlight=>
> >> 
> >> And there are many Japanese blogs/sites with some great-looking
> >> modifications:
> >> 
> >> 
> >> http://www.korg.co.jp/Product/Dance/monotron/welove/
> >> 
> >> 
> >> http://beatnic.jp/monotron/
> >> 
> >> Google translate:
> >> 
> >> <http://translate.google.co.uk/translate?u=http%3A%2F%2Fbeatnic.jp%2Fmonotro
> >> n%2F&sl=ja&tl=en&hl=&ie=UTF-8>
> >> 
> >> 
> >> http://masa921.hp.infoseek.co.jp/monotron_mod.htm
> >> 
> >> Google translate:
> >> 
> >> <http://translate.google.co.uk/translate?u=http%3A%2F%2Fmasa921.hp.infoseek.
> >> co.jp%2Fmonotron_mod.htm&sl=ja&tl=en&hl=&ie=UTF-8>
> >> 
> >>> In the 
> >>> adverts it states that it uses the same filter as the MS-10 
> >>> and the early MS-20. My question is this: The MS-20 has 
> >>> lowpass and highpass filters. The MS-10 only low pass. Would 
> >>> this mean that the korg 35 chip is configurable as both?
> >> 
> >> The original was, yes, just hook it up slightly differently for highpass...
> >> 
> >>> Would that also mean that I could use one Monotron as 
> >>> highpass, and one as lowpass?
> >> 
> >> Good question - so far I have not seen a mod to reconfigure a Monotron for
> >> the highpass filter (which may mean it is difficult). Can't wait to get my
> >> hands on one to see how do-able that is! But note that the Monotron isn't
> >> using the Korg35 per se, just the same arrangement of transistors that are
> >> in the Korg35 (as far as I can tell from the various photos of it around the
> >> web).
> >> 
> >> Tim (still pissed at Korg for not releasing it worldwide in one go)
> >> __________________________________________________________
> >> Tim Stinchcombe 
> >> 
> >> Cheltenham, Glos, UK
> >> email: tim102 at tstinchcombe.freeserve.co.uk
> >> www.timstinchcombe.co.uk
> >> 
> >> 
> >> 
> >> 
> >> 
> >> _______________________________________________
> >> Synth-diy mailing list
> >> Synth-diy at dropmix.xs4all.nl
> >> 
> >> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> >> 
> >> 
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at dropmix.xs4all.nl
> > http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> > 
> 
> 
>