[sdiy] Substitute for pin matrixes? lab plate.

[karl dalen]

> >> to most other things.
> >> http://img710.imageshack.us/img710/7948/labplate.jpg
> >>   
> > Someone, somewhere used the same idea for a studio
> wide patch panel.
> 5 minutes of googling:  http://www.firstpr.com.au/sys-admin/DIY-patchbay/

Hehe, he's even referring to SDIY list 2009 for discussions
about matrix panels, two posts but its here alright! :-)

See, JH was right in his prophecy, everything has already been thaught of!

> Note how the solderless breadboard was disassembled and the
> I/O was soldered to the back and ground on every other row.

Yes, really ugly and that's EXACTLY what i feared early on first with
the IDC solution and then the Lab plate. But, there are a neat solution
to it, one solder two L angled pin list in between metal rims an viola'
one gets a flat cable adapted lab plate, and one can use any IDC 
connector size, its very easy to do, neat and tidy no cable mess.

One should actually mount the Lab plate beneath the front panel, it
looks a lot more professional then top mounted.

KD




      __________________________________________________________
Går det långsamt? Skaffa dig en snabbare bredbandsuppkoppling. 
Sök och jämför priser hos Kelkoo.
http://www.kelkoo.se/c-100015813-bredband.html?partnerId=96914325