[sdiy] Substitute for pin matrixes? Probability list update 2.

cheater cheater cheater00 at gmail.com
Mon Jan 25 10:41:47 CET 2010


Nope, the IDE stuff I mentioned was different.

On Mon, Jan 25, 2010 at 01:48, karl dalen <dalenkarl at yahoo.se> wrote:
> Already been discussed in various versions, not a bad idea at all.
>
> KD
>
>  Den mån 2010-01-25 skrev Simon Amery <cymmeau at gmail.com>:
>
>> Från: Simon Amery <cymmeau at gmail.com>
>> Ämne: Re: [sdiy] Substitute for pin matrixes? Probability list update 2.
>> Till: "karl dalen" <dalenkarl at yahoo.se>
>> Kopia: synth-diy at dropmix.xs4all.nl
>> Datum: måndag 25 januari 2010 04.34
>> Not really a matrix but similar and very
>> cheap:
>> Get a bunch of old IDE cables and pull the plugs off them
>> and bridge the terminals into rows like this: http://www.instructables.com/id/Bread-Board-from-IDE-Cables/
>>
>>
>> and then glue as many as you want together with maybe some
>> perpendicular ones down the side as buses. Set each row as
>> in in or out in some sort of logical fashion and then use
>> those premade stiff breadboard wire jumpers to patch.
>>
>> I don't know anything about electronics so it's
>> probably a stupid idea practically speaking.
>>
>> On Mon, Jan 25, 2010 at 3:20 AM,
>> karl dalen <dalenkarl at yahoo.se>
>> wrote:
>>
>>
>>
>> Turning stones for something cheaper(dead cheap)then a
>> Gillimetti matrix:
>>
>>
>>
>> 1: Aligator clips on wire mesh as array.
>>
>> 2: Sub miniature SPDT arrays.
>>
>> 3: Toy railway/mechano sub sub bananas arrays.
>>
>> 4: 2.5mm tele arrays.
>>
>> 5: 3.5mm tele arrays.
>>
>> 6: 4mm bananas arrays.
>>
>> 7: Upside down IDC array resistor or wire as cross
>> connects.
>>
>> 8. Turned IC holders arrays.
>>
>> 9:  Pin lists arrays.
>>
>> 10: Miniature push button arrays.
>>
>> 11: Veroboard layers as arrays, with bridge shorting
>> between.
>>
>> 12: MT8816 and others, 4066, serial latches, MCU etc.
>>
>> 13: Latching Hall sensor arrays, controlling muxes.
>>
>> 14: Relay arrays, klicketi klack sound on its own.
>>
>> 15: Buchla paper solder punch card holders pluggable
>> something.
>>
>> 16: A gigantic array of pots.
>>
>> 17: Fuse holder array.
>>
>> 18: Automatic fuse array.
>>
>> 19: Rims of plastic Lab plates arranged in arrays.
>>
>> 20: Standing sub miniature USB connectors, can carry 4
>> signals each.
>>
>> 19: Replace the analog shit with digital DSP shit for plain
>> convenience?
>>
>> 20: LDR Matrix with card with holes blocking a light
>> source.
>>
>> 21: Spark gap and other high voltage switches, watch out
>> for your safety.
>>
>>
>>
>> At the moment im out of ideas so i just post a updated
>> probability
>>
>> list as a reference for folks to know what has been
>> discussed so far!
>>
>> Not saying you shouldn't evolve over it again, perhaps
>> you find
>>
>> something this time you didn't find the first?
>>
>>
>>
>> KD
>>
>>
>>
>>
>>
>>
>>  __________________________________________________________
>>
>> Går det långsamt? Skaffa dig en snabbare
>> bredbandsuppkoppling.
>>
>> Sök och jämför priser hos Kelkoo.
>>
>> http://www.kelkoo.se/c-100015813-bredband.html?partnerId=96914325
>>
>>
>>
>> _______________________________________________
>>
>> Synth-diy mailing list
>>
>> Synth-diy at dropmix.xs4all.nl
>>
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>>
>>
>>
>
>
>      __________________________________________________________
> Ta semester! - sök efter resor hos Kelkoo.
> Jämför pris på flygbiljetter och hotellrum här:
> http://www.kelkoo.se/c-169901-resor-biljetter.html?partnerId=96914052
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>




More information about the Synth-diy mailing list