[sdiy] Substitute for pin matrixes? lab plate.

[Dave Manley]

Dave Manley wrote:
> karl dalen wrote:
>> Patching will be messy if one does not arrange modules well but its
>> way cleaner then regular modular system in which enough cables can
>> strangle you. Its way cheaper to and a resistor can act as a signal
>> scaler.
>> I took the measuers  draw it my cad program.
>> Its dead cheap (5-7euro) and managable, even usable compared
>> to most other things.
>> http://img710.imageshack.us/img710/7948/labplate.jpg
>>   
> Someone, somewhere used the same idea for a studio wide patch panel.
5 minutes of googling:  http://www.firstpr.com.au/sys-admin/DIY-patchbay/

Note how the solderless breadboard was disassembled and the I/O was 
soldered to the back and ground on every other row.

-Dave