[sdiy] Substitute for pin matrixes?

[karl dalen]

2010-01-25 skrev ASSI <Stromeko at nexgo.de>:

> special when I bought them, from Conrad I think). 
> What are you trying 
> to plug into them?

Same as you, a tiny resistor leg and a single wire.
 
> Do you need to? Put an IDC pin header on a cable and plug
> that into the board.

Ofcoarse on can do that to but one needs a light patch cable.

> I'm talking about just the metal contact strips, sans the
> plastic.  
> Haven't seen those in a while, but did not really do a
> search either.  
> You can of course remove the strips from the lab plates and
> make a  proper cross bar matrix out of them anyway.

Why? when you have the entire patch panel already made!
The plastic are the panel, look rather nice to.

> > I had a look but could not find test system
> connectors?
> > Everything looks very expensive there.
> 
> What do you expect from military, space and avionics?

But say so in the first place then so i know. (that they where military).

KD


      __________________________________________________________
Ta semester! - sök efter resor hos Kelkoo.
Jämför pris på flygbiljetter och hotellrum här:
http://www.kelkoo.se/c-169901-resor-biljetter.html?partnerId=96914052