[sdiy] Substitute for pin matrixes? Probability list update 3.
karl dalen
dalenkarl at yahoo.se
Mon Jan 25 01:42:53 CET 2010
Turning stones for something cheaper(dead cheap)then a Gillimetti matrix:
1: Aligator clips on wire mesh as array.
2: Sub miniature SPDT arrays.
3: Toy railway/mechano sub sub bananas arrays.
4: 2.5mm tele arrays.
5: 3.5mm tele arrays.
6: 4mm bananas arrays.
7: Upside down IDC array resistor or wire as cross connects.
8. Turned IC holders arrays.
9: Pin lists arrays.
10: Miniature push button arrays.
11: Veroboard layers as arrays, with bridge shorting between.
12: MT8816 and others, 4066, serial latches, MCU etc.
13: Latching Hall sensor arrays, controlling muxes.
14: Relay arrays, klicketi klack sound on its own.
15: Buchla paper solder punch card holders pluggable something.
16: A gigantic array of pots.
17: Fuse holder array.
18: Automatic fuse array.
19: Rims of plastic Lab plates arranged in arrays.
20: Standing sub miniature USB connectors, can carry 4 signals each.
19: Replace the analog shit with digital DSP shit for plain convenience?
20: LDR Matrix with card with holes blocking a light source.
21: Spark gap and other high voltage switches, watch out for your safety.
22: Reed switches in arrays, controlled with magnet.
23........and counting!
KD
__________________________________________________________
Går det långsamt? Skaffa dig en snabbare bredbandsuppkoppling.
Sök och jämför priser hos Kelkoo.
http://www.kelkoo.se/c-100015813-bredband.html?partnerId=96914325
More information about the Synth-diy
mailing list