FW: [sdiy] Creative/Simple Bypass circuits for effects

[Jerry Gray-Eskue]

-----Original Message-----
From: Jerry Gray-Eskue [mailto:jerryge at cableone.net]
Sent: Monday, January 18, 2010 11:48 AM
To: Altitude
Subject: RE: [sdiy] Creative/Simple Bypass circuits for effects


You will need a DPDT switch, in one position the signal goes into the switch
then into the filter, and the filter output goes into the switch and then to
the output. In the second position the signal goes into the switch and then
to the output, the filter is disconnected on both input and output side. In
other words the signal bypasses the filter entirely.

Cheers,

- Jerry

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl]On Behalf Of Altitude
Sent: Monday, January 18, 2010 10:35 AM
To: 'synth diy'
Subject: [sdiy] Creative/Simple Bypass circuits for effects


Greets list,

  I have a little quandary. I am wrapping up my second WPTA sampler build to
which I have added a VCF (Yusynth 4072 Clone).  The sampler simply goes
directly into the filter which then goes to a single output.  I initially
(without thinking about it) figured I would just use a DPST switch to
reroute the dry sampler signal to the out but now that it is time to do it,
that obviously does not really work or something isn't connecting in my head
on how to do it.  Does anyone have a slick solution?

Cheers,
Raph

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy