[sdiy] Connecting two halves of a case...

[James Elliott]

Could you please keep the discussion on the list as I'm currently building something that will need a similar solution.

Thanks,
Jim



----- Original Message ----
From: George Mattson <axisair at comcast.net>
To: James Dunn <james at 4thharmonic.com>; "synth-diy at dropmix. xs4all. nl" <synth-diy at dropmix.xs4all.nl>
Sent: Sun, January 3, 2010 12:40:30 PM
Subject: RE: [sdiy] Connecting two halves of a case...

Hi James,

You should email me. That's exactly how I do my cases. :)
I can offer suggestions, references and maybe have access to some parts you
may need.

George Mattson
http://www.mattsonminimodular.com

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of James Dunn
Sent: Sunday, January 03, 2010 10:29 AM
To: synth-diy at dropmix. xs4all. nl
Subject: [sdiy] Connecting two halves of a case...

Hi list,

I've been working on a small portable synth which is housed in a flip 
top case (of which both halves contain circuitry) and am a bit stuck on 
how to connect them together. I need to connect wires for ±15V, ground 
and audio out (mono). I could take it outside or inside the case and it 
could be something that I plug in every time I use it or is hard-wired. 
Does anyone know of a good way of doing this? Or even a product that is 
available from some supplier?

thanks

James
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.725 / Virus Database: 270.14.124/2598 - Release Date: 01/03/10
01:41:00


_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy