[sdiy] 3-conductor + shield cable recommendo
George Mattson
axisair at comcast.net
Sun Feb 14 22:42:41 CET 2010
I use this,
http://www.mouser.com/ProductDetail/Belden-Wire-Cable/9533-060100/?qs=sGAEpi
MZZMuPnr6I6Psi5YokVj8%2f6Itxyo90FgE6Vzs%3d
George Mattson
-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Jason Proctor
Sent: Sunday, February 14, 2010 12:45 PM
To: synth-diy at dropmix.xs4all.nl
Subject: Re: [sdiy] 3-conductor + shield cable recommendo
for 3-core + shield ? nobody carries that as a stock item AFAICS.
i'm not looking for a microphone cable :-)
>Try going to a guitar center or any hifi shop
>
>HTH
>D.
>
>On Sun, Feb 14, 2010 at 21:20, Jason Proctor <jason at redfish.net> wrote:
>> did the "audio grade" spec give any clues? ;-)
>>
>> sorry it was late and i should have been more specific. it's for audio
>> wiring in a tube/opto compressor.
>>
>> and i'm in the USA, which seems to be the limiting factor! i can't get
the
>> Beldon 3+shield in anything less than a 1000 foot reel.
>>
>>
>>> For What ?,
>>>
>>> The answer to this question could make a big difference.
>>>
>>> Graham
>>>
>>> On 14 Feb 2010, at 07:03, Jason Proctor wrote:
>>>
>>>> hi,
>>>>
>>>> before i go for a 2-conductor or 4-conductor hack alternative, can
>>>> someone recommend a decent quality 3 conductor + shield audio grade
cable
>>>> that i can buy in a quantity less than one metric ton?
>>>>
>>>> thanks :-)
>>>> J
>>>> _______________________________________________
>>>> Synth-diy mailing list
>>>> Synth-diy at dropmix.xs4all.nl
>>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.733 / Virus Database: 271.1.1/2687 - Release Date: 02/13/10
23:35:00
More information about the Synth-diy
mailing list