[sdiy] 3-conductor + shield cable recommendo

[BrightBoy]

I'm pretty sure that RedCo is cheaper than Full Compass:

www.redco.com

Jeff

-----Original Message-----
>From: Jason Proctor <jason at redfish.net>
>Sent: Feb 14, 2010 3:57 PM
>To: synth-diy at dropmix.xs4all.nl
>Subject: Re: [sdiy] 3-conductor + shield cable recommendo
>
>it really does look like i'm stuck with lashing together 2x 2+shield.
>
>i can get 2-pair multi-shielded gepflex by the foot* from fullcompass 
>etc, but it does seem a little overkill. it's designed for permanent 
>underground never-touch runs, etc.
>
>*the USA will go metric shortly after they invent the 10-string 
>banjo, or Burma/Myanmar converts, whichever happens first.
>
>
>
>>Sorry Jason,
>>
>>I was thinking of microphone cable (Or any external cable) as 
>>opposed to internal wiring cable.
>>
>>I don't know if the cable manufacturers are putting pressure on the 
>>distributors these days but it seems to be getting
>>increasingly difficult to buy cut lengths of cable as opposed to 
>>full drums (Typically 50m or 100m in the UK). It may
>>be related to the volatile price of raw copper these days. You 
>>increasingly see messages in catalogues saying that
>>the cable price is subject to increases during the life of the catalogue.
>>
>>Graham
>>
>>On 14 Feb 2010, at 20:20, Jason Proctor wrote:
>>
>>>did the "audio grade" spec give any clues? ;-)
>>>
>>>sorry it was late and i should have been more specific. it's for 
>>>audio wiring in a tube/opto compressor.
>>>
>>>and i'm in the USA, which seems to be the limiting factor! i can't 
>>>get the Beldon 3+shield in anything less than a 1000 foot reel.
>
>_______________________________________________
>Synth-diy mailing list
>Synth-diy at dropmix.xs4all.nl
>http://dropmix.xs4all.nl/mailman/listinfo/synth-diy