[sdiy] 3-conductor + shield cable recommendo

[cheater cheater]

There are microphone cables with a separate shield for people who want
a single-ended shield. They usually work well for balanced
interconnects too. They're not that uncommon, but I don't know what's
common around your parts :-)

D.

On Sun, Feb 14, 2010 at 21:44, Jason Proctor <jason at redfish.net> wrote:
> for 3-core + shield ? nobody carries that as a stock item AFAICS.
>
> i'm not looking for a microphone cable :-)
>
>
>
>> Try going to a guitar center or any hifi shop
>>
>> HTH
>> D.
>>
>> On Sun, Feb 14, 2010 at 21:20, Jason Proctor <jason at redfish.net> wrote:
>>>
>>>  did the "audio grade" spec give any clues? ;-)
>>>
>>>  sorry it was late and i should have been more specific. it's for audio
>>>  wiring in a tube/opto compressor.
>>>
>>>  and i'm in the USA, which seems to be the limiting factor! i can't get
>>> the
>>>  Beldon 3+shield in anything less than a 1000 foot reel.
>>>
>>>
>>>>  For What ?,
>>>>
>>>>  The answer to this question could make a big difference.
>>>>
>>>>  Graham
>>>>
>>>>  On 14 Feb 2010, at 07:03, Jason Proctor wrote:
>>>>
>>>>>  hi,
>>>>>
>>>>>  before i go for a 2-conductor or 4-conductor hack alternative, can
>>>>>  someone recommend a decent quality 3 conductor + shield audio grade
>>>>> cable
>>>>>  that i can buy in a quantity less than one metric ton?
>>>>>
>>>>>  thanks :-)
>>>>>  J
>>>>>  _______________________________________________
>>>>>  Synth-diy mailing list
>>>>>  Synth-diy at dropmix.xs4all.nl
>>>>>  http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>>
>>>  _______________________________________________
>>>  Synth-diy mailing list
>>>  Synth-diy at dropmix.xs4all.nl
>>>  http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>