[sdiy] 3-conductor + shield cable recommendo

[cheater cheater]

There's no reason at all that that a connection cable should suddenly
change in diameter/material when it passes the magical barrier called
a "chassis".

You can buy cut lengths from Maplin everywhere in London, I don't know
if they do that by mail, probably yes. But their selection of cables
isn't that great. For audio cables maybe try digital village or
something like that.

D.

On Sun, Feb 14, 2010 at 21:39, Graham Atkins <gatkins at blueyonder.co.uk> wrote:
> Sorry Jason,
>
> I was thinking of microphone cable (Or any external cable) as opposed to
> internal wiring cable.
>
> I don't know if the cable manufacturers are putting pressure on the
> distributors these days but it seems to be getting
> increasingly difficult to buy cut lengths of cable as opposed to full drums
> (Typically 50m or 100m in the UK). It may
> be related to the volatile price of raw copper these days. You increasingly
> see messages in catalogues saying that
> the cable price is subject to increases during the life of the catalogue.
>
> Graham
>
> On 14 Feb 2010, at 20:20, Jason Proctor wrote:
>
>> did the "audio grade" spec give any clues? ;-)
>>
>> sorry it was late and i should have been more specific. it's for audio
>> wiring in a tube/opto compressor.
>>
>> and i'm in the USA, which seems to be the limiting factor! i can't get the
>> Beldon 3+shield in anything less than a 1000 foot reel.
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>