[sdiy] LF398 sources

[Tim Parkhurst]

Did a search on the National Semi web site and they pointed to
distributors who have some. Here's the Digi-Key listing:

http://search.digikey.com/scripts/DkSearch/dksus.dll?WT.z_cid=sp_014_0310_buynow&site=us&lang=en&%20?Keywords=LF398AN&vendor=14

The part is still in production, so should be easily available,
although I'm surprised Mouser doesn't seem to carry it.

Here's the Nat Semi page for grins:
http://www.national.com/mpf/LF/LF398.html#Order


Tim (easily surprised) Servo
-- 
"Sire, the church of God is an anvil that has worn out many hammers."
- H.L. Hastings




On Mon, Dec 6, 2010 at 7:32 AM, anthony <aankrom at bluemarble.net> wrote:
> I don't know if I'm just not looking in the right place or what, but I can't
> seem to find a supplier for the LF398. It's been a while since I checked,
> but I don't think mouser or digikey had any. I'm going to check again, but I
> thought I'd ask here if anybody had any - maybe for a parts trade? I have a
> lot of valuable parts that I've salvaged that are very synth-worthy.
>
> What would be the best circuit to substitute into a schematic that called
> for an LF398? Use an FET and cap in front of an op-amp like usual?
>
> Maybe I should check eBay. Hope I don't have to buy from Hong Kong...
> Anthony
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>