[sdiy] Poly Monster

[Karl Ekdahl]

Yoho...

Long time since i DIYed anything for myself, but here ya go;
http://www.sdiy.org/knas/polymonster/polymonster.php

Don't worry, as it states i didn't mutilate anything.

Karl

--- Den tors 2010-12-02 skrev dan snazelle <subjectivity at hotmail.com>:

> Från: dan snazelle <subjectivity at hotmail.com>
> Ämne: Re: [sdiy] ELEKTOR PCB PROTOTYPING MACHINE
> Till: 
> Kopia: "synth-diy DIY" <synth-diy at dropmix.xs4all.nl>
> Datum: torsdag 2 december 2010 14:17
> thanks for the info
> 
> i was more just looking at this as a pie in the sky idea
> but it sounds like it might not be so great afterall
> 
> 
> myropcb has started doing proto-typing anyway
> 
> thanks!
> 
> dan
> 
> On Dec 2, 2010, at 12:58 AM, Kyle Stephens wrote:
> 
> > There's this list here that would probably have some
> answers. I think some folks were talking about the printer
> idea a while ago, and which models worked well...
> > 
> > http://tech.dir.groups.yahoo.com/group/Homebrew_PCBs/
> > 
> > 
> > _Kyle
> > 
> > --- On Wed, 12/1/10, Tim Parkhurst <tim.parkhurst at gmail.com>
> wrote:
> > 
> >> From: Tim Parkhurst <tim.parkhurst at gmail.com>
> >> Subject: Re: [sdiy] ELEKTOR PCB PROTOTYPING
> MACHINE
> >> To: "dan snazelle" <subjectivity at hotmail.com>
> >> Cc: "synth-diy DIY" <synth-diy at dropmix.xs4all.nl>
> >> Date: Wednesday, December 1, 2010, 9:43 PM
> >> I still say there's a market for a
> >> reasonably-priced inkjet based
> >> printer that could be used for printing resist on
> PCBs. I
> >> have heard
> >> of some people who have modded printers and found
> the
> >> proper
> >> ink/resist to do this, but it sounds like a lot of
> hit and
> >> miss. The
> >> proper solution would have a nice flat feed bed,
> adjustable
> >> for .030"
> >> to .125" PCBs and come with the proper ink carts.
> Could
> >> probably be
> >> done and sold for... $300? $200? Could be a
> worthwhile
> >> product?
> >> 
> >> Tim (I'll volunteer to beta test) Servo
> >> -- 
> >> "Sire, the church of God is an anvil that has worn
> out many
> >> hammers."
> >> - H.L. Hastings
> >> 
> >> 
> >> 
> >> On Wed, Dec 1, 2010 at 8:22 PM, dan snazelle
> <subjectivity at hotmail.com>
> >> wrote:
> >>> anyone seen this?
> >>> 
> >>> http://www.elektor.com/projects/pcb-prototyper-%28100619%29.1599728.lynkx
> >>> 
> >>> around 5 grand.
> >>> 
> >>> I was wondering if anyone on this list has a
> PCB
> >> router at their disposal...sure seems like a nice
> thing to
> >> have
> >>> 
> >>> 
> >>> http://www.elektor.com/projects/pcb-prototyper-%28100619%29.1599728.lynkx
> >>> 
> >>> 
> >>> 
> >>>
> _______________________________________________
> >>> Synth-diy mailing list
> >>> Synth-diy at dropmix.xs4all.nl
> >>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> >>> 
> >> _______________________________________________
> >> Synth-diy mailing list
> >> Synth-diy at dropmix.xs4all.nl
> >> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> >> 
> > 
> > 
> > 
> > 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>