[sdiy] DIY Moog 960 Sequencer

[Stewart Pye]

Cornutt, David K wrote:
> From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Stewart Pye
>
>   
>> I don't have all the switches or the DAC hooked up yet, but I thought it would be better to have the SET switch action wait >until it got the next trigger pulse. That way as the sequence is playing you can manually select a step without screwing up the >timing. 
>>     
>
> You might want to make that switch selectable.  What occurs to me is that if it always
> waits on a trigger pulse, you won't be able to use the set switches when the sequencer
> is stopped, e.g., starting the sequence near the end in order to create a grace note.
>
>   
Hi David,

If the sequencer was stopped (or not receiving a clock signal) and you 
pressed a set button, that set button would be stored and the sequencer 
would go to that step immediately on the sequencer starting or receiving 
a clock pulse. The only downside here is that there is no indication of 
what step will be next from the step LED's, other than that I think it 
achieves what you mentioned above. Anyhow, I could add a global 
"immediate set" switch.

Regards,
Stewart.